●Description
The Nexys Video is a powerful platform for audio/video applications. Built around the Artix-7 XC7A200T, the most powerful chip from the Xilinx Artix-7 FPGA family, the Nexys Video has all the performance and FPGA real estate needed for high-bandwidth and low-latency A/V processing.Utilizing A/V signals is made easy with an on-board Mini Displayport, three high-speed digital video ports, and a 24-bit audio codec. One can conveniently scale their design with Ethernet, UART, and USB interfaces and integrate it into larger systems. There is no limit to customizability with the 160-pin FMC LPC connector and four additional Pmod ports.The Nexys Video is supported by Xilinx"s Vivado Design Suite, including the free WebPACK edition, making the Nexys Video a great option for any budget.Guides and demos are available to help users get started quickly with the Nexys Video. These can be found through the Support Materials tab.

●Features
・FPGA Features
〇Xilinx Artix-7 XC7A200T-1SBG484C
〇33,650 logic slices, each with four 6-input LUTs and 8 flip-flops
〇13 Mbits of fast block RAM (3x more than the Nexys 4 DDR)
〇10 clock management tiles, each with phase-locked loop (PLL)
〇740 DSP slices
〇Internal clock speeds exceeding 450MHz
〇On-chip analog-to-digital converter (XADC)
〇Up to 3.75Gbps GTP transceivers

・Board Features
〇Programmable over JTAG, Quad-SPI Flash, microSD, and USB flash drive
〇512MB 800MHz DDR3
〇32MB Quad-SPI flash
〇microSD card slot for nonvolatile storage (card not included)
〇Dedicated onboard USB port for JTAG programming and data transfers
〇Powered from any 12V source (36W wall supply included)
〇HDMI sink and HDMI source
〇Mini DisplayPort source
〇240bit Audio codec w/ four 3.5mm jacks
〇10/100/1000 Ethernet PHY with included unique MAC address
〇User EEPROM
〇USB-UART bridge
〇Digilent parallel transfer interface (DTPI) for high-speed data transfers over USB
〇Digilent serial peripheral interface (DSPI) for medium-speed data transfers over USB
〇Onboard user interfaces: 128x32 monochrome OLED display, 5 user push buttons, 8 user switches, 8 user LEDs
〇USB HID host for mice and keyboards
〇Fully-populated 160-pin FMC LPC connector
〇Four Pmod ports, Pmod for XADC signals

●What"s Included
・Nexys Video Artix-7 FPGA
・Custom Digilent cardboard packing
・USB A to micro-B programming cable